Strato M Movie Player Rack Shelf Installation

Single Unit Installation

1. Place the Strato M Movie Player upside down on a soft, clean surface.
2. Place the rack shelf centered over the unit. Align the two rack mount holes with the two Strato M mounting holes found between the front and rear feet. Install two of the provided screws to secure the unit to the shelf. Do not overtighten.
   
3. Carefully flip the shelf and unit. Place the single-opening fascia in front of the unit and slide into position. Make sure the side tabs of the shelf and front panel reinforcements do not overlap as shown in the rear view below.
   
4. Ready to install. This panel is not firmly attached until the shelf is installed in the rack.
   
5. While firmly holding the fascia to the rack shelf, install in the rack.
   

Dual Unit Installation

1. Place two Strato M Movie Players upside down on a soft, clean surface.
2. Place the rack shelf centered over the units. Align the rack mount holes with the two Strato M mounting holes found between the front and rear feet on each player. Install two of the provided screws per player to secure the units to the shelf. Do not overtighten.
   
3. Carefully flip the shelf and units. Place the dual-opening fascia in front of the units and slide into position. Make sure the side tabs of the shelf and front panel reinforcements do not overlap as shown in the rear view below.
   
4. Ready to install. This panel is not firmly attached until the shelf is installed in the rack.
   
5. While firmly holding the fascia to the rack shelf, install in the rack.